MavicMapper logoJK4UMavicMapper

Supported drone · Pro tri-camera

Mavic 3 Pro waypoint mission planner

MavicMapper plans native DJI Fly waypoint missions for the DJI Mavic 3 Pro – orthomosaic and 3D mapping, POI orbits, façade scans, cinematic video paths, panoramas and hi-res footprints. Free, offline, for Windows. Every calculation uses the Mavic 3 Pro’s own camera (4/3 CMOS, 20 MP), wind limit (12 m/s), waypoint speed (15 m/s), gimbal range and battery.

▶ Plan for the Mavic 3 Pro in the Mission LabHow the specs are used

Mavic 3 Pro in MavicMapper

Mavic 3 Pro technical specs used for planning

SpecMavic 3 Pro
ClassPro tri-camera
Weight958 g
Rated flight time43 min
Planner: usable battery (default)22 min
Max speed (sport)21 m/s
Planner: waypoint legs ≤15 m/s
Planner: max airspeed into wind16 m/s
Wind resistance12 m/s
Service ceiling6,000 m
Operating temperature−10 … 40 °C
Gimbal tilt (planning)−90° … +35°
Battery5000 mAh · 77 Wh
Video linkO3+ · up to 15 km (FCC)
Obstacle sensingOmnidirectional vision (APAS 5.0)
DJI Fly waypoint missionsyes · native

Cameras & photo modes

Camera / photo modeSensorEquiv.PhotoApertureMin. interval JPG / RAWFile JPG / RAWVideo
Hasselblad4/3 CMOS24 mm5280×3956 (20 MP)f/2.8–110.7 s / 2 s12 / 34 MB5.1K 50fps · 4K 120fps · FHD 200fps
Medium Tele1/1.3in70 mm8064×6048 (48 MP)f/2.82 s / 3.5 s22 / 80 MB4K 60fps · FHD 120fps
Tele1/2in166 mm4000×3000 (12 MP)f/3.40.7 s / 1.5 s5 / 18 MB4K 60fps · FHD 120fps

Values from the planner’s own tables (DJI spec sheets; minimum intervals and file sizes are planning values).

Ground resolution (GSD) and footprint by height

GSD = sensor width × height ÷ (focal length × image width). Footprint per photo below each value.

Height above ground40 m60 m80 m100 m120 m
Hasselblad1.07 cm/px
56×42 m
1.60 cm/px
84×63 m
2.13 cm/px
113×85 m
2.67 cm/px
141×106 m
3.20 cm/px
169×127 m
Medium Tele0.25 cm/px
20×15 m
0.37 cm/px
30×22 m
0.49 cm/px
40×30 m
0.61 cm/px
49×37 m
0.74 cm/px
59×45 m
Tele0.21 cm/px
8×6 m
0.31 cm/px
13×9 m
0.42 cm/px
17×13 m
0.52 cm/px
21×16 m
0.63 cm/px
25×19 m

Mission types for the Mavic 3 Pro

From plan to flight

  1. Draw the area, place the POI or the wall line on the map and pick a preset.
  2. Check the 3D preview – it replays the real mission file with speed, stops, gimbal moves and photos.
  3. Export the KMZ – one mission per battery.
  4. Upload over USB to the controller (guide) or import by hand (guide).
  5. Set the camera in DJI Fly from the summary and fly within visual line of sight.

Frequently asked questions

Does the DJI Mavic 3 Pro support waypoint missions?

Yes – the Mavic 3 Pro flies native waypoint missions in DJI Fly. MavicMapper writes them as DJI WPML KMZ files and can upload them over USB to the controller.

What GSD does the Mavic 3 Pro reach for mapping?

With the Hasselblad (20 MP) the ground resolution is about 1.60 cm/px at 60 m, 2.13 cm/px at 80 m and 3.20 cm/px at 120 m above ground.

How fast can the Mavic 3 Pro map with continuous capture?

At 80 m and 75 % front overlap the photo spacing is about 21.2 m. With a 0.7 s minimum photo interval the camera allows about 30.2 m/s; the planner also caps waypoint legs at 15 m/s and checks motion blur for your shutter.

Which camera modes can I plan with on the Mavic 3 Pro?

Planner cameras and photo modes: Hasselblad (20 MP), Medium Tele (48 MP), Tele (12 MP). Set the same mode in DJI Fly before the flight – a waypoint file cannot switch the lens or photo size.

Is MavicMapper free for the Mavic 3 Pro?

Yes. Free, no account, no subscription, runs 100 % locally on Windows.

Other supported drones

Plan it with MavicMapper – free

Free offline DJI waypoint mission planner for Windows. No account, no subscription, no cloud. Plan, preview in 3D, export a DJI Fly KMZ and upload it to your controller over USB.